10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.
The ACSR exam has 50 questions and runs 1 hours 5 minutes.
A documentary team joins a facility that already has spare capacity in a NEXIS Storage Group. The team needs a separately mountable volume with its own capacity allocation and access permissions. What should the administrator create?
Correct answer: B - A new Workspace within the existing Storage Group.
A replacement switch has just been brought into service. Several NEXIS Media Packs now report Network degraded simultaneously, although Workspaces remain mounted. A brief ping from an editor to the local gateway succeeds, and there are no drive-failure warnings. Where should the initial investigation focus?
Correct answer: D - The common switch and uplink paths, checking configuration, errors, and packet loss.
A review account has direct No Access on the CUTS and EXPORTS Workspaces. It belongs to two groups: Editors grants Read-Write to CUTS and No Access to EXPORTS; Reviewers grants Read-Only to both. No folder-level permissions apply. After the account reconnects, its effective permissions are:
Correct answer: A - CUTS: Read-Write; EXPORTS: Read-Only.
An edit-suite relocation requires a 350-meter fiber run. Both endpoints use qualified Cisco SFP-10G-SR transceivers, and the existing trunk is OM3 multimode fiber. The transceivers must stay. Which cabling change brings the entire run within Cisco's published 10GbE reach specification?
Correct answer: A - Replace the complete run with OM4 multimode fiber.
An editor needs sustained reads of 90 MB/s from a NEXIS Workspace. On the Windows client, PathDiag Self-Test averages 480 MB/s without errors. The technician records the storage path as qualified. Which interpretation should replace that conclusion?
Correct answer: C - PathDiag reaches that rate without performing read/write I/O to the storage system.
A studio wants to expand its two-Engine NEXIS PRO+ installation while retaining one shared-storage system. A supplier offers F2 Engines running the same NEXIS release. The proposed expansion adds their Media Packs to the existing system. The decisive compatibility issue is that:
Correct answer: B - PRO-family and Enterprise Engines cannot form one shared-storage system.
An editing workstation has address 10.60.8.101/27 and gateway 10.60.8.97. It must contact a NEXIS endpoint at 10.60.8.140. The router connects both networks, the workstation has no additional routes, and its ARP cache is empty. Select the ARP target for the next hop and the destination address in the outgoing IPv4 packet.
Correct answer: D - ARP target: 10.60.8.97; IP destination: 10.60.8.140
A new storage Engine is being added to NEWS_STORE, an operating NEXIS system with a dedicated SDA. Software versions match, and the new Engine has a unique Engine name and unused interface IP addresses. Which configuration joins NEWS_STORE's existing filesystem?
Correct answer: C - Storage System Name: NEWS_STORE; Run as System Director: disabled; retain the existing filesystem.
Before accepting a new, empty NEXIS Engine, a technician prepares a random read/write burn-in in Toolbox Disk Analyzer. Its Media Packs are bound to the System Director but are not yet in a Storage Group. Production Engines are managed by the same System Director. Which selection protects the production media?
Correct answer: C - Select only the newly added empty drives for the test.
A network design assigns the combined bandwidth of all editors' media streams to the SDA+ connection. The NEXIS system has a dedicated SDA+ and separate storage Engines. Which traffic model should be used to correct the design?
Correct answer: A - Clients exchange metadata with the SDA+ and transfer media with the storage Engines.
The full bank has 1,020 more ACSR questions with explanations.
Continue in the free practice test →
View plans